Brusho Craft Spritzer Set
YPO See all from this supplier
• Create bursts of vibrant colour for backgrounds – Spritz water on to card or water colour paper – Sprinkle Brusho® Crystal Colour over it, watch as it bursts into an amazing firework of colour across the page
• Leave the background as it is or, for additional effects – spritz again – add
additional colours if required
• Try using with stencils or leave to dry and stamp over the top
• Ideal for card making, stencilling, scrap booking, colouring paper products e.g. paper flowers, mono-printing, water colour painting, design work, decorative
effects on fabric and much more
• These highly pigmented water-colour crystals are exclusively manufactured
by us at our factory in Sheffield
• Acid free. Non Toxic
• The NEW Craft Spritzer Intro Set contains 6 exciting colours, a Spritzer bottle and instruction sheet
Hints and tips
• MIXING BRUSHO WITH WATER: eg. for water colour painting and using as a wash over a resist design , warm/hot water should be used. Add Brusho® to water not water to Brusho®. Mix well.
• BRUSHO THICKENER: is available from Colourcraft C & A Limited. When you are ready to use the thickener, dampening the sheets of paper to be used will help to keep the paste workable for longer.
Method for thickening Brusho: Sprinkle 20gms Brusho® thickener into 600ml water. Stir very briskly to prevent lumps. Leave the mix for at least 24 hours before using until the thickener has been absorbed by the water. Thin slightly if necessary.
• BLEACH/STERILISING FLUID TECHNIQE: Achieve amazing results using Brusho® and either Bleach or a Bleach pen (or Milton baby sterilising fluid). It is an excellent way of reproducing the intense brightness of stars, suns, fire, nebulae, water and wave highlights. (See image above). For pure white effect apply bleach/sterilising fluid whilst design is still wet. For a slightly yellow/orange finish, apply after the design is dry.
• ADDING BRUSHO® TO OTHER MEDIUMS: For a coloured resist effect, add Brusho® Crystal Colour to Colourcraft C & A Ltd Acrylic Wax. Also use it to colour other mediums e.g. our 3D Puff Binder and Crackle effects – great for card making and also fabric design – see Brusho® with Crackle image by Lesley Wharton (overleaf)
• BRUSHO® AND PVA: Mixing Brusho® with PVA creates a wonderful transparent paint - illustrated in the photo overleaf. Add sand, rice fine gravel/other materials for a textured, grainy finish.
Show more
• Leave the background as it is or, for additional effects – spritz again – add
additional colours if required
• Try using with stencils or leave to dry and stamp over the top
• Ideal for card making, stencilling, scrap booking, colouring paper products e.g. paper flowers, mono-printing, water colour painting, design work, decorative
effects on fabric and much more
• These highly pigmented water-colour crystals are exclusively manufactured
by us at our factory in Sheffield
• Acid free. Non Toxic
• The NEW Craft Spritzer Intro Set contains 6 exciting colours, a Spritzer bottle and instruction sheet
Hints and tips
• MIXING BRUSHO WITH WATER: eg. for water colour painting and using as a wash over a resist design , warm/hot water should be used. Add Brusho® to water not water to Brusho®. Mix well.
• BRUSHO THICKENER: is available from Colourcraft C & A Limited. When you are ready to use the thickener, dampening the sheets of paper to be used will help to keep the paste workable for longer.
Method for thickening Brusho: Sprinkle 20gms Brusho® thickener into 600ml water. Stir very briskly to prevent lumps. Leave the mix for at least 24 hours before using until the thickener has been absorbed by the water. Thin slightly if necessary.
• BLEACH/STERILISING FLUID TECHNIQE: Achieve amazing results using Brusho® and either Bleach or a Bleach pen (or Milton baby sterilising fluid). It is an excellent way of reproducing the intense brightness of stars, suns, fire, nebulae, water and wave highlights. (See image above). For pure white effect apply bleach/sterilising fluid whilst design is still wet. For a slightly yellow/orange finish, apply after the design is dry.
• ADDING BRUSHO® TO OTHER MEDIUMS: For a coloured resist effect, add Brusho® Crystal Colour to Colourcraft C & A Ltd Acrylic Wax. Also use it to colour other mediums e.g. our 3D Puff Binder and Crackle effects – great for card making and also fabric design – see Brusho® with Crackle image by Lesley Wharton (overleaf)
• BRUSHO® AND PVA: Mixing Brusho® with PVA creates a wonderful transparent paint - illustrated in the photo overleaf. Add sand, rice fine gravel/other materials for a textured, grainy finish.
Product code:
717853-YPO
• Create bursts of vibrant colour for backgrounds – Spritz water on to card or water colour paper – Sprinkle Brusho® Crystal Colour over it, watch as it bursts into an amazing firework of colour across the page
• Leave the background as it is or, for additional effects – spritz again – add
additional colours if required
• Try using with stencils or leave to dry and stamp over the top
• Ideal for card making, stencilling, scrap booking, colouring paper products e.g. paper flowers, mono-printing, water colour painting, design work, decorative
effects on fabric and much more
• These highly pigmented water-colour crystals are exclusively manufactured
by us at our factory in Sheffield
• Acid free. Non Toxic
• The NEW Craft Spritzer Intro Set contains 6 exciting colours, a Spritzer bottle and instruction sheet
Hints and tips
• MIXING BRUSHO WITH WATER: eg. for water colour painting and using as a wash over a resist design , warm/hot water should be used. Add Brusho® to water not water to Brusho®. Mix well.
• BRUSHO THICKENER: is available from Colourcraft C & A Limited. When you are ready to use the thickener, dampening the sheets of paper to be used will help to keep the paste workable for longer.
Method for thickening Brusho: Sprinkle 20gms Brusho® thickener into 600ml water. Stir very briskly to prevent lumps. Leave the mix for at least 24 hours before using until the thickener has been absorbed by the water. Thin slightly if necessary.
• BLEACH/STERILISING FLUID TECHNIQE: Achieve amazing results using Brusho® and either Bleach or a Bleach pen (or Milton baby sterilising fluid). It is an excellent way of reproducing the intense brightness of stars, suns, fire, nebulae, water and wave highlights. (See image above). For pure white effect apply bleach/sterilising fluid whilst design is still wet. For a slightly yellow/orange finish, apply after the design is dry.
• ADDING BRUSHO® TO OTHER MEDIUMS: For a coloured resist effect, add Brusho® Crystal Colour to Colourcraft C & A Ltd Acrylic Wax. Also use it to colour other mediums e.g. our 3D Puff Binder and Crackle effects – great for card making and also fabric design – see Brusho® with Crackle image by Lesley Wharton (overleaf)
• BRUSHO® AND PVA: Mixing Brusho® with PVA creates a wonderful transparent paint - illustrated in the photo overleaf. Add sand, rice fine gravel/other materials for a textured, grainy finish.
• Leave the background as it is or, for additional effects – spritz again – add
additional colours if required
• Try using with stencils or leave to dry and stamp over the top
• Ideal for card making, stencilling, scrap booking, colouring paper products e.g. paper flowers, mono-printing, water colour painting, design work, decorative
effects on fabric and much more
• These highly pigmented water-colour crystals are exclusively manufactured
by us at our factory in Sheffield
• Acid free. Non Toxic
• The NEW Craft Spritzer Intro Set contains 6 exciting colours, a Spritzer bottle and instruction sheet
Hints and tips
• MIXING BRUSHO WITH WATER: eg. for water colour painting and using as a wash over a resist design , warm/hot water should be used. Add Brusho® to water not water to Brusho®. Mix well.
• BRUSHO THICKENER: is available from Colourcraft C & A Limited. When you are ready to use the thickener, dampening the sheets of paper to be used will help to keep the paste workable for longer.
Method for thickening Brusho: Sprinkle 20gms Brusho® thickener into 600ml water. Stir very briskly to prevent lumps. Leave the mix for at least 24 hours before using until the thickener has been absorbed by the water. Thin slightly if necessary.
• BLEACH/STERILISING FLUID TECHNIQE: Achieve amazing results using Brusho® and either Bleach or a Bleach pen (or Milton baby sterilising fluid). It is an excellent way of reproducing the intense brightness of stars, suns, fire, nebulae, water and wave highlights. (See image above). For pure white effect apply bleach/sterilising fluid whilst design is still wet. For a slightly yellow/orange finish, apply after the design is dry.
• ADDING BRUSHO® TO OTHER MEDIUMS: For a coloured resist effect, add Brusho® Crystal Colour to Colourcraft C & A Ltd Acrylic Wax. Also use it to colour other mediums e.g. our 3D Puff Binder and Crackle effects – great for card making and also fabric design – see Brusho® with Crackle image by Lesley Wharton (overleaf)
• BRUSHO® AND PVA: Mixing Brusho® with PVA creates a wonderful transparent paint - illustrated in the photo overleaf. Add sand, rice fine gravel/other materials for a textured, grainy finish.
| Supplier Name | YPO |
|---|---|
| Supplier SKU | 717853 |
