UNILAB Power Amplifier - 12Vdc
Findel See all from this supplier
The Power Amplifier is a very useful classroom resource that allows students to amplify and listen to a variety of audio sources ranging from microphones and audio devices with a 3.5mm headphone socket, to signal generators equipped with 4mm socket outputs. The amplifier is particularly suitable for driving Vibration Generators and Rubens' tubes when a power signal generator is not available. The amplifier has an internal 10W speaker that can be switched off
When not required. The outputs are overload and short-circuit protected.
- Output: 3.5Wrms / 4ohm or 2Wrms / 8ohm
- Total harmonic distortion: 0.05% (1W / 1kHz)
- Frequency response: 20Hz to 20kHz (-3dB)
- Signal-to-noise ratio: 86dB (A weighted)
- Input sensitivity: 40mV / 150K Ohm
- Supply voltage: 12Vdc
The Power Amplifier is a very useful classroom resource that allows students to amplify and listen to a variety of audio sources ranging from microphones and audio devices with a 3.5mm headphone socket, to signal generators equipped with 4mm socket outputs. The amplifier is particularly suitable for driving Vibration Generators and Rubens' tubes when a power signal generator is not available. The amplifier has an internal 10W speaker that can be switched off
When not required. The outputs are overload and short-circuit protected.
- Output: 3.5Wrms / 4ohm or 2Wrms / 8ohm
- Total harmonic distortion: 0.05% (1W / 1kHz)
- Frequency response: 20Hz to 20kHz (-3dB)
- Signal-to-noise ratio: 86dB (A weighted)
- Input sensitivity: 40mV / 150K Ohm
- Supply voltage: 12Vdc
| Supplier Name | Findel |
|---|---|
| Restricted Market | Kuwait, Oman, Qatar, Saudi Arabia, United Arab Emirates |
| Supplier SKU | HC1706910 |
